Epoxy floor coating in Ansonia, CT.
Atlas Epoxy Floors coats garages, basements, patios and commercial floors in Ansonia, Connecticut, about 8.2 miles from our workshop in Milford. Your town has around 3,198 owner-occupied detached houses and sits inland and back from the shoreline water table, so your slab runs drier than the coastal towns on average. Your estimate is free, and Brad reads your slab before we quote it.
Free, no obligation, and nothing to sign. We answer the same day, weekends included.
Epoxy and Resin Flooring in Ansonia, Connecticut
Ansonia's own plan says its buildings are the oldest among its neighbors. Census figures put the median home at 1954, with nearly two-thirds built before 1960, and the city grew up around copper and brass mills on the Naugatuck River. If your slab has been painted, patched and painted again, and many here have, your floor is mostly a prep job for us before it's a coating job.
The housing here
US Census ACS 2024 five-year estimates put Ansonia at about 7,212 occupied households, of which roughly 4,189 own rather than rent, and about 3,198 of those are detached houses. Detached is the number that matters to us, because that is where your garage is. Half the houses around you were built before 1954, about three in five before 1960 and hardly any since 2000, and the age of your house is the best single guide we have to what your slab needs.
What Does an Ansonia Basement From Before 1940 Need?
A careful look from us before any coating. About two in five of Ansonia's structures predate 1939, its plan says, and your slab may differ a lot from your neighbor's.
Thin or partial slabs
Older basements were sometimes poured thin, or in sections over bare ground, and without a vapor barrier. Brad checks your thickness and soundness in a few spots. If the concrete is crumbling, we'll tell you before anyone talks about colors.
Old paint and sealers
Decades of basement paint, tile adhesive and sealers have to come off first. We diamond grind your floor back to bare concrete so the new epoxy bonds to the slab itself, which is what lets it last.
Moisture behind the flood wall
The city's plan says a flood wall went up after the 1955 flood, which destroyed whole neighborhood blocks. It holds back the river, but if your basement sits on the low streets near it, we'll still want a moisture test before coating.
Every floor on this page is one we poured
Ansonia Housing and the Age of Its Concrete
Census figures put Ansonia's median home at 1954, the oldest of the towns around it, so odds are your house is older than you'd guess. Only about one in fifteen was built since 2000.
One- and two-family homes near the center
The plan describes the city center ringed by mostly one- and two-family homes, shifting to single-family farther out. If your two-family basement doubles as laundry and storage, we'd usually suggest a solid color epoxy that's easy to clean.
Just under half detached
Census figures show just under half of Ansonia's homes are detached. The plan says Ansonia has the most multi-family housing among its neighbors, close to Derby by share, so you may well share your basement, and we work around that.
Houses on steep ground
Ansonia's plan discourages new building and roads on steep slopes. If your home is already built into a hillside, your garage may be cut into grade, where water runs along the back wall toward your floor. We'll look there first.
Where Atlas Works in Ansonia
Ansonia's plan describes a compact core, an old industrial spine along the river and residential neighborhoods on the outskirts, and we take jobs in all of them.
Main Street and the City Center
Main Street is the city's mixed-use commercial and residential center, and the Upper Main Street Historic District is on the National Register. If your building's here, expect us to find an old storefront basement or ground floor with apartments above.
West Ansonia
Across the Naugatuck from downtown, West Ansonia lost its bridges in the 1955 flood, the city's plan recalls. If you're nearer the river there, we'll test your slab for moisture as a matter of course.
The outer neighborhoods
Farther from the center, the plan describes mostly single-family neighborhoods. Your garage here is likely a private attached or detached bay, a simpler job for us than the shared basements downtown, and often a same-day install.
Ansonia Mill Buildings and Industrial Parks
Ansonia's plan says the older mill buildings along the Naugatuck are still its largest taxpayers, alongside Fountain Lake Commerce Park and Hershey Industrial Park. We coat floors in both kinds of space.
Copper and brass mill floors
The plan names the Ansonia Copper and Brass and Farrel properties as redevelopment sites. If you're in an old mill, your floor probably carries oil, metal dust and patched sections, and we'll usually grind it hard before a quartz or solid color system.
The industrial parks
The plan describes newer light industrial and office space in the city's northwest and says water and sewer were extended to the industrial parks. Your newer building likely has a flatter slab, and we'd suit it with solid color or anti-slip for warehouse and shop use.
Mixed-use conversions
The plan expects the riverfront industrial areas to become mixed-use commercial with denser housing. If you're converting mill apartments or a ground-floor shop, you'll want floors that look finished, and we find metallic or solid color epoxy works well over a ground and leveled slab.
What customers wrote
4.7 from 15 Google reviews. We publish every one of them on the reviews page, including the one star and what came of it.
Great experince did the shop floors and came out great!
excellent job on my Garage thanks again
best in the area when it comes to epoxy thanks gain Brad
Ansonia Older Home Inquiries
Pre-1960 houses make up most of Ansonia. If yours is one, these details help us size up your slab.
Past coatings
Paint, tile, glue or an old epoxy. Knowing what's on your floor tells us how much grinding we'll plan.
Cracks or heaving
Point out cracks you can catch a fingernail in, or sections that rock under you. Brad will look closer at those.
Photos if you have them
A couple of your phone photos of the floor and lower walls help us arrive ready and spot moisture stains early.
Towns Near Ansonia We Also Cover
If you're in one of these towns, you share a border or a short drive with Ansonia, and we'll quote you the same way.
The nearest larger town
West Haven is the closest of our ten largest towns to you, and its page covers the towns around it: West Haven.
Next door
Your neighbors in Ansonia: Derby, Seymour, Woodbridge, Shelton, Orange, Bethany. You'll find every town we cover on our service area page.
Choose your space
Pick the floor you're thinking about and see how we coat it.
Garage
- Slip-resistant.
- Shrugs off oil and road salt.
- Hot tires don't lift it.
Basement
- Waterproof.
- Moisture tested first.
- No more concrete dust.
Commercial and kitchens
- USDA approved for commercial kitchens.
- Takes a mop and a spill.
- Phased around your hours.
Industrial
- Forklift traffic.
- Chemical resistant.
- Anti-slip where specified.
Pool and patio
- Grippy when wet.
- UV-stable top coat.
- Keeps its color.
Countertops
- Seamless.
- Wipes clean.
- Metallic or solid color.
How your epoxy floor gets done, from first call to parking on it
Three steps, and Brad does every one of them himself. Most residential floors are finished in a day.
- 1
You call, text or send the form
Tell us the room and roughly how big it is. We'll talk you through the range and book a time to come and look, often the same day. Weekends count, and there's nothing to sign.
- 2
Brad reads your slab and you pick your finish
He checks for cracks, old coating and moisture, then measures up. You choose your flake blend or metallic against your own floor, not a brochure. Your written quote comes back the same day.
- 3
We grind it back and build your floor up
Your slab goes back to bare concrete under a diamond grinder with dust extraction. Then the primer, the body coat with your flake or metallic, and the top coat. You get your walk-on and park-on times with the quote.
Epoxy floors in Ansonia
About 8.2 miles from the workshop in Milford, which is a same-day visit. Off the shoreline, so the preparation is more often about the age and condition of the concrete than about water. About 3,198 detached owner households sit here, which is the housing that has a garage to coat.
Get my free quoteOur service area on the map
Every town within 30 miles of our base at 9 Wood Avenue in Milford, on Connecticut land.
Questions people ask
Can a basement floor from the 1920s or 1930s be epoxy coated?
Often, if your concrete is sound. We test for moisture, check thickness and soundness, and grind off old paint. If your slab is too far gone, we'll say so before quoting and talk through repair with you first.
Do you coat floors in Ansonia's old mill buildings?
Yes. If you've converted mill space for a shop, studio or warehouse, it's a good fit for quartz or solid color epoxy. Expect us to grind heavily first, since old industrial floors carry decades of oil and patches.
Is my basement near the Naugatuck River too wet for epoxy?
Your floor may need a moisture-tolerant primer. Ansonia's flood wall holds back the river, but groundwater can still reach your slab. A taped plastic sheet test tells us which system your floor can take.
How far is Ansonia from you?
Roughly eight miles from our workshop in Milford. You're close enough that Brad can look at your slab in the morning and have your quote back to you that day.
Do you charge extra to come to Ansonia?
No. Your estimate is free and Ansonia is inside our regular working area.
What does it cost?
It is decided by the size of the floor, the system you pick and the state of the slab. The estimate is free and comes back the same day you ask.
Ready to stop looking at that floor?
Tell us roughly what you have and we'll come and look at it. The quote is free, there's nothing to sign, and you'll know what your floor costs before you commit to anything.
Get Your Free Quote Call or Text (203) 496-6386