Epoxy floor coating in Stamford, CT.
Atlas Epoxy Floors coats garages, basements, patios and commercial floors in Stamford, Connecticut, about 27.2 miles from our workshop in Milford. Your town has around 16,936 owner-occupied detached houses and sits on Long Island Sound, so a shoreline water table is why we test your basement slab before we coat it. Your estimate is free, and Brad reads your slab before we quote it.
Free, no obligation, and nothing to sign. We answer the same day, weekends included.
Epoxy and Resin Flooring in Stamford, Connecticut
Stamford is two different places for us. Downtown and the South End are high-rise and mixed-use buildings, while North Stamford and Westover are single-family homes on large lots that the city's sewer doesn't reach. Census figures put detached houses at only about a third of Stamford's homes, so if you're calling us from here, you're as likely to be a condo owner, a landlord or a business as a homeowner with a two-car garage.
The housing here
US Census ACS 2024 five-year estimates put Stamford at about 55,291 occupied households, of which roughly 26,990 own rather than rent, and about 16,936 of those are detached houses. Detached is the number that matters to us, because that is where your garage is. Half the houses around you were built before 1973, about a third before 1960 and about one in five since 2000, and the age of your house is the best single guide we have to what your slab needs.
Does Stamford's Shoreline Change How We Coat Your Basement Floor?
It can. Stamford has 19 miles of Long Island Sound shoreline and the city maps coastal flood zones, so if your basement is low and near the water, we test it for moisture before any quote.
Testing near the Sound
The city is planning for about 40 inches of sea level rise by 2100 and has a Coastal Flood Resiliency Plan underway for its shoreline neighborhoods. If your basement is in Shippan, the Cove or the South End, Brad tapes plastic sheeting to your slab first and reads what comes through before we talk about systems.
River lots inland
The Rippowam and Mianus Rivers run down through the city, and the comprehensive plan maps floodways along them. Your house can be a long way from the beach and still sit low beside a river, so we run the same test wherever your slab is below grade and the ground stays wet.
When your reading is high
If your slab is pushing moisture, coating it right away traps the problem under a new finish and it lets go later. Brad will tell you so, show you the reading, and talk through a moisture-tolerant primer or fixing the water source before we put anything down.
Every floor on this page is one we poured
Stamford Housing From High-Rises to Large-Lot Ranches
Your Stamford home is likely younger than many in the county, with a Census median build year of 1973, and the city splits between large multifamily buildings and single-family streets.
Large lots up north
The city's plan describes North Stamford and Westover as single-family homes on large lots, and notes neither is served by city sewer. If your garage is up there, it's a straightforward residential job for us, and a bigger floor falls into a lower per-square-foot rate band.
Condo and rental garages
With just over half of Stamford households renting, plenty of floors we're asked about belong to a building owner or an association. If yours is a shared garage or storage room, you'll need that sign-off, and we usually call for an anti-slip finish that keeps residents safe in wet weather.
Slabs from the 1970s
A median build year of 1973 means your garage slab may be around fifty years old. It's long past any curing issues, so we deal with wear, oil stains and hairline cracks, which diamond grinding and crack repair handle before the coating.
Where Atlas Works in Stamford
We cover every neighborhood the city names in its plan, and these are the ones where your floor questions differ most.
Shippan and the Cove
Both are shoreline neighborhoods, and the city's coastal resiliency work is aimed at places like them. If you live here, we take a moisture reading on your basement slab as standard, and your garage floor, facing salt air and winter road salt, does well with a UV-stable polyaspartic topcoat.
North Stamford and Westover
The plan notes these neighborhoods aren't on city sewer and have limited access to public water. Homes are single-family on big lots, so we mostly do garages and finished basements for you, and the only real variable is our drive.
Glenbrook and Ridgeway-Bulls Head
The plan calls these moderate-density neighborhoods and expects more mixed-use building around the Glenbrook station and the Bulls Head intersection. That brings us a blend of older single-family garages, small apartment buildings and storefronts where you'll want a floor you can mop.
Stamford Commercial and Light Industrial Floors
Stamford has the highest density of businesses per resident in Connecticut, according to its comprehensive plan, so we get asked about commercial floors here more than in the towns around it.
Industrial Flex areas
The Stamford 2035 plan creates an Industrial Flex land use for light manufacturing, distribution, fabrication and creative workspaces. If your floor takes forklifts, carts and spills, we'd point you to a quartz or thick solid-color system with an anti-slip broadcast where people walk.
Office parks changing use
The plan says large suburban office parks face high vacancy and gives them room to become educational, research or residential space. Each new use asks something different of your floor, from chemical resistance in a lab to a finished look in a lobby.
Shops and restaurants
Downtown and the neighborhood centers the city wants to grow are full of small storefronts. Your back rooms, restrooms and prep areas do well with a sealed, joint-free epoxy that you clean with a mop, plus an anti-slip texture wherever the floor gets wet.
What customers wrote
4.7 from 15 Google reviews. We publish every one of them on the reviews page, including the one star and what came of it.
my floors look amazing
Great experince did the shop floors and came out great!
excellent job on my Garage thanks again
Stamford Commercial Inquiries
If you're calling about a Stamford business or building, here's what speeds up our quote.
Size and use
Your rough square footage and what happens on the floor: foot traffic, carts, forklifts or food. It sets the system and your rate band.
Who signs off
For condos and rentals, give us the owner or association contact. It saves you a second visit later.
What's on it now
Bare concrete, tile, carpet glue or an old coating. We plan the grinding around it.
Towns Near Stamford We Also Cover
If you're in one of these towns, you share a border or a short drive with Stamford, and we'll quote you the same way.
Towns around Stamford
If you're near Stamford, we're probably already working your way: New Canaan, Darien.
Next door
Your neighbors in Stamford: Norwalk, Wilton, Westport, Weston. You'll find every town we cover on our service area page.
Choose your space
Pick the floor you're thinking about and see how we coat it.
Garage
- Slip-resistant.
- Shrugs off oil and road salt.
- Hot tires don't lift it.
Basement
- Waterproof.
- Moisture tested first.
- No more concrete dust.
Commercial and kitchens
- USDA approved for commercial kitchens.
- Takes a mop and a spill.
- Phased around your hours.
Industrial
- Forklift traffic.
- Chemical resistant.
- Anti-slip where specified.
Pool and patio
- Grippy when wet.
- UV-stable top coat.
- Keeps its color.
Countertops
- Seamless.
- Wipes clean.
- Metallic or solid color.
How your epoxy floor gets done, from first call to parking on it
Three steps, and Brad does every one of them himself. Most residential floors are finished in a day.
- 1
You call, text or send the form
Tell us the room and roughly how big it is. We'll talk you through the range and book a time to come and look, often the same day. Weekends count, and there's nothing to sign.
- 2
Brad reads your slab and you pick your finish
He checks for cracks, old coating and moisture, then measures up. You choose your flake blend or metallic against your own floor, not a brochure. Your written quote comes back the same day.
- 3
We grind it back and build your floor up
Your slab goes back to bare concrete under a diamond grinder with dust extraction. Then the primer, the body coat with your flake or metallic, and the top coat. You get your walk-on and park-on times with the quote.
Epoxy floors in Stamford
About 27.2 miles from the workshop in Milford. On the shoreline, so a slab here is asked to deal with damp before it is asked to deal with anything else, and the moisture test comes first. About 16,936 detached owner households sit here, which is the housing that has a garage to coat.
Get my free quoteOur service area on the map
Every town within 30 miles of our base at 9 Wood Avenue in Milford, on Connecticut land.
Questions people ask
Do Stamford condo garages need association approval for an epoxy floor?
Usually, yes. In a condo or rental building your garage floor belongs to the association or owner, so get their sign-off before you book us. Brad can describe the system and the prep so your board knows what's going down.
Do Stamford homes near the water need a different garage coating?
Mostly the prep changes. If you're near the Sound, we test your slab's moisture before quoting and usually recommend a UV-stable polyaspartic topcoat that stands up to damp, salted winters.
Can a Stamford restaurant or shop floor be coated?
Yes. Our commercial epoxy and quartz systems suit kitchens, back rooms and retail floors. Brad looks at your slab, the traffic and how you clean the floor, then we send a quote the same day.
How far is Stamford from you?
You're about 27 miles from our workshop in Milford, inside the roughly one-hour radius Brad works. Whether you've got a home, a condo or a business, you get the same slab test and a same-day quote from us.
Do you charge extra to come to Stamford?
No. Your estimate is free and Stamford is inside our regular working area.
What does it cost?
It is decided by the size of the floor, the system you pick and the state of the slab. The estimate is free and comes back the same day you ask.
Ready to stop looking at that floor?
Tell us roughly what you have and we'll come and look at it. The quote is free, there's nothing to sign, and you'll know what your floor costs before you commit to anything.
Get Your Free Quote Call or Text (203) 496-6386