Epoxy floor coating in New Canaan, CT.
Atlas Epoxy Floors coats garages, basements, patios and commercial floors in New Canaan, Connecticut, about 23.3 miles from our workshop in Milford. Your town has around 5,049 owner-occupied detached houses and sits inland and back from the shoreline water table, so your slab runs drier than the coastal towns on average. Your estimate is free, and Brad reads your slab before we quote it.
Free, no obligation, and nothing to sign. We answer the same day, weekends included.
Epoxy and Resin Flooring in New Canaan, Connecticut
New Canaan is known for its mid-century modern houses. The town's plan points to the Harvard Five, a group of architects who designed numerous homes here between 1949 and 1973, and to Philip Johnson's Glass House estate on Ponus Ridge Road. Census figures put the median New Canaan home at 1967, right inside that period, and if you own one, you may well want your concrete floors kept on show and looking intentional.
The housing here
US Census ACS 2024 five-year estimates put New Canaan at about 7,153 occupied households, of which roughly 5,984 own rather than rent, and about 5,049 of those are detached houses. Detached is the number that matters to us, because that is where your garage is. Half the houses around you were built before 1967, about a third before 1960 and about one in five since 2000, and the age of your house is the best single guide we have to what your slab needs.
Can Epoxy Work in Your New Canaan Mid-Century Modern House?
Yes, with care. If your mid-century house has exposed concrete, we can put down a solid color or metallic epoxy, but we test the slab first because it may be sixty or seventy years old.
Suiting your architecture
Flat, even color usually suits a modern interior better than busy flake. A solid color or a low-key metallic keeps your floor quiet, and we'd use a satin topcoat if you don't want the high-gloss look.
Old slabs and vapor
If your concrete was poured in the 1950s, it may have gone down without a vapor barrier underneath. Our plastic-sheet test shows whether moisture is coming up, and that reading decides whether we put a moisture-tolerant primer on before any color.
Historic properties
The Glass House estate is a National Historic Landmark, and the town's local historic district covers Oenoke Ridge, Main Street and Park Street. Connecticut historic district review is aimed at exterior changes, but if your property is listed, it's worth checking before we do interior work.
Every floor on this page is one we poured
New Canaan Homes, Lot Sizes and Slabs
New Canaan is largely built out, according to its 2024 plan, so the floor we work on for you is most likely in an existing house or its addition.
Four-acre lots up north
The town's zoning puts four-acre residential lots in the northern part of New Canaan, with smaller lots in the interior and south. Your property may carry more than one slab, such as an attached garage, an outbuilding and a pool house, and we assess each on its own.
Large family houses
The plan notes about six in ten New Canaan homes have four or more bedrooms. If yours is a bigger house, it likely comes with a bigger garage and a finished basement, and a larger floor drops into our lower per-square-foot rate band.
A spread of ages
Census figures show a bit over a third of homes predate 1960 and about one in five were built since 2000. Yours could be anything from a postwar garage with patched cracks to an addition poured in the last few years, and we expect both.
Where Atlas Works in New Canaan
We work all over New Canaan, so whether you're downtown or on the ridge roads that carry traffic north through town, we'll come to you.
Downtown, Elm and Main
The plan describes downtown as village-like, with retail, dining and professional offices around Elm and Main Streets. It's also where New Canaan's sewer lines are concentrated, so if your home is close in, you're more likely to be on town sewer and Aquarion water.
Ponus Ridge and Oenoke Ridge
These collector and arterial roads run through residential New Canaan. The Glass House sits on Ponus Ridge and the Nature Center is off Oenoke Ridge. If you live out here, you may rely on a private well and septic, as many homes do according to the town's plan.
Silvermine and the river valleys
The Silvermine Arts Center anchors that corner of town, and the Silvermine River is one of four floodways New Canaan regulates, along with the Rippowam, Noroton and Fivemile. If your basement is near any of them, we take a moisture reading first.
New Canaan Shops, Studios and Pool House Floors
Commercial and industrial land is less than one in every hundred acres of New Canaan, so most of what we do beyond your garage is in shops, studios and outbuildings.
Downtown shops and restaurants
Downtown retail and dining sit in the town's business zones around Elm and Main. If you have a small storefront or restaurant kitchen, we'd put down a quartz or anti-slip epoxy that holds up to wet mopping and steady foot traffic.
Arts and community buildings
The town's plan lists cultural sites from the Silvermine Arts Center to Grace Farms and the buildings in Waveny Park. Studios, workshops and back-of-house rooms in places like these need durable, low-sheen floors you can clean easily.
Pool houses and patios
Your pool deck or patio gets a different system from your indoor floors, with UV stability and slip resistance at the top of the list. Brad looks at drainage and the condition of your existing concrete before we suggest one.
What customers wrote
4.7 from 15 Google reviews. We publish every one of them on the reviews page, including the one star and what came of it.
Great experince did the shop floors and came out great!
excellent job on my Garage thanks again
best in the area when it comes to epoxy thanks gain Brad
New Canaan Basement Inquiries
If you're calling us about a New Canaan basement, here's what to have ready.
Finished or bare
Is your basement finished, partly framed or open concrete? It changes how much floor we'll be working on.
Any dampness
Musty smell, white powder on your slab or water after storms. It tells us what to look for.
How you'll use it
Gym, playroom, storage or studio. We pick the system and the finish to suit your use.
Towns Near New Canaan We Also Cover
If you're in one of these towns, you share a border or a short drive with New Canaan, and we'll quote you the same way.
The nearest larger town
Stamford is the closest of our ten largest towns to you, and its page covers the towns around it: Stamford.
Choose your space
Pick the floor you're thinking about and see how we coat it.
Garage
- Slip-resistant.
- Shrugs off oil and road salt.
- Hot tires don't lift it.
Basement
- Waterproof.
- Moisture tested first.
- No more concrete dust.
Commercial and kitchens
- USDA approved for commercial kitchens.
- Takes a mop and a spill.
- Phased around your hours.
Industrial
- Forklift traffic.
- Chemical resistant.
- Anti-slip where specified.
Pool and patio
- Grippy when wet.
- UV-stable top coat.
- Keeps its color.
Countertops
- Seamless.
- Wipes clean.
- Metallic or solid color.
How your epoxy floor gets done, from first call to parking on it
Three steps, and Brad does every one of them himself. Most residential floors are finished in a day.
- 1
You call, text or send the form
Tell us the room and roughly how big it is. We'll talk you through the range and book a time to come and look, often the same day. Weekends count, and there's nothing to sign.
- 2
Brad reads your slab and you pick your finish
He checks for cracks, old coating and moisture, then measures up. You choose your flake blend or metallic against your own floor, not a brochure. Your written quote comes back the same day.
- 3
We grind it back and build your floor up
Your slab goes back to bare concrete under a diamond grinder with dust extraction. Then the primer, the body coat with your flake or metallic, and the top coat. You get your walk-on and park-on times with the quote.
Epoxy floors in New Canaan
About 23.3 miles from the workshop in Milford. Off the shoreline, so the preparation is more often about the age and condition of the concrete than about water. About 5,049 detached owner households sit here, which is the housing that has a garage to coat.
Get my free quoteOur service area on the map
Every town within 30 miles of our base at 9 Wood Avenue in Milford, on Connecticut land.
Questions people ask
Is a metallic epoxy floor right for a New Canaan modern house?
It can be. A metallic or solid color epoxy gives your floor a calm, continuous surface that suits mid-century interiors. We test your slab first, since many houses here date from the 1950s and 1960s and may lack a vapor barrier.
Can epoxy go over a New Canaan basement floor that's been damp?
Sometimes. Brad tapes plastic sheeting to your slab to measure moisture. We can handle mild readings with a moisture-tolerant primer, while heavy ones mean you'll need the water source fixed first, and he'll tell you which.
Can you coat a New Canaan pool house floor?
Yes. If you have a pool house or changing room, we'd use an anti-slip epoxy or polyaspartic finish that handles wet feet. Brad looks at your slab, the drainage and the sun exposure before we recommend one.
How far is New Canaan from you?
You're about 23 miles from our workshop in Milford, within the hour or so Brad covers. You'll get our quote back the same day he sees your floor.
Do you charge extra to come to New Canaan?
No. Your estimate is free and New Canaan is inside our regular working area.
What does it cost?
It is decided by the size of the floor, the system you pick and the state of the slab. The estimate is free and comes back the same day you ask.
Ready to stop looking at that floor?
Tell us roughly what you have and we'll come and look at it. The quote is free, there's nothing to sign, and you'll know what your floor costs before you commit to anything.
Get Your Free Quote Call or Text (203) 496-6386