Epoxy floor coating in Monroe, CT.
Atlas Epoxy Floors coats garages, basements, patios and commercial floors in Monroe, Connecticut, about 11.5 miles from our workshop in Milford. Your town has around 5,343 owner-occupied detached houses and sits inland and back from the shoreline water table, so your slab runs drier than the coastal towns on average. Your estimate is free, and Brad reads your slab before we quote it.
Free, no obligation, and nothing to sign. We answer the same day, weekends included.
Epoxy and Resin Flooring in Monroe, Connecticut
Monroe has no municipal sewer, and the town's own plan says many residents get their water from private wells. If your house is on a well, the pressure tank, filters or sump pit probably sit on your basement floor, so a coating job here often starts with us planning around what's on the slab. Census figures show better than nine in ten Monroe homes are owner occupied, so most floors we price here belong to the people living above them.
The housing here
US Census ACS 2024 five-year estimates put Monroe at about 6,209 occupied households, of which roughly 5,940 own rather than rent, and about 5,343 of those are detached houses. Detached is the number that matters to us, because that is where your garage is. Half the houses around you were built before 1978, about a quarter before 1960 and about one in ten since 2000, and the age of your house is the best single guide we have to what your slab needs.
What changes when your Monroe floor has a well tank or sump pit on it?
Mostly the prep and the edges. We work around your equipment or raise it, and Brad sorts out the plan with you at the quote visit so nothing gets coated in place by accident.
Pressure tanks and filters
Your well system usually sits right on the basement floor. We coat around the base, or under it where a plumber has raised it. At the quote, Brad points out which approach suits your room and what it changes in price and schedule.
Sump pits and floor drains
The town's plan notes that Monroe has surficial aquifer potential and that many homes draw on groundwater. We edge your sump pit or floor drain cleanly, so the coating stops where water needs to go and your pit lid still sits flat.
Homes on town water
The plan says Aquarion serves about half of Monroe's area, in large zones on the east and west sides. If you're on public water, your basement floor is often clearer, and our job comes down to slab condition and moisture.
Every floor on this page is one we poured
Monroe's 1960s to 1980s Houses and Their Garage Floors
Census figures put the median Monroe home at 1978, and the town's plan says most of its houses went up between 1960 and 1989, so yours likely did too.
Detached houses almost everywhere
Better than eight in ten Monroe homes are detached single-family houses, a much higher share than Fairfield County as a whole according to the town's plan. So your floor is most likely a private garage or basement, and we price it one house at a time.
The 1980s building peak
The plan calls the 1980s Monroe's busiest decade for housing, with about a quarter of the stock built then. If your slab's from then, it's around forty years old, and we expect hairline cracks and old stains, which grinding and crack filling handle.
The older and newer ends
About a quarter of homes predate 1960 and fewer than one in ten were built after 2000. If yours is older, we look closest at moisture and old patches. If it's newer, we grind off the builder's sealer before anything bonds.
Where Atlas Works in Monroe
Monroe covers about twenty-six square miles with several historic village centers, and we'll come to you anywhere in it.
Monroe Center
The historic district near Monroe Turnpike and Shelton Road is both a National Register and a local district, and the Historic District Commission reviews changes to structures there. Your garage floor is interior work, but if your project touches the outside, check with the commission first.
Stepney and Upper Stepney
Stepney is one of the areas the town's plan names for traffic calming, and Route 25 (Main Street) carries about 20,000 vehicles a day up the west side of town toward Upper Stepney. If you're on the west side, it's the road we'll likely come in on.
Stevenson and Lake Zoar
In the northeast corner, Route 34 crosses the Housatonic at Stevenson Dam, and Webb Mountain Park looks over Lake Zoar. If your home's nearer the lake and river, you're closer to water, so we put the plastic sheet down in your basement before talking about color.
Monroe Commercial Corridors and the Pepper Street Industrial Area
Monroe's business floors are concentrated along Routes 25, 34 and 111, with industrial zoning near the Trumbull line and a larger area along the Newtown line. We coat floors in all of them.
Pepper Street and Corporate Drive
The town's largest industrial area runs along the Newtown line through Pepper Street, Corporate Drive, Cambridge Drive and Enterprise Drive. If your warehouse or production floor is there, we'd typically suggest a solid color or quartz system built for wheels, pallets and spills.
Route 111 near Trumbull
The plan puts Monroe's strongest cluster of jobs along Route 111 near the Trumbull line, along with the town's only limited office retail district. Your office lobby, break room or storage room there suits a flake or metallic system that wears well.
Restaurants and salons on the corridors
The plan notes retail space shifting toward restaurants and salons, which use more water than shops. If you run one, your floor sees spills, chemicals and constant foot traffic, so we'll talk anti-slip texture and a hard topcoat first.
What customers wrote
4.7 from 15 Google reviews. We publish every one of them on the reviews page, including the one star and what came of it.
amazing job on my basement thanks again Brad the epoxy flooring was better then even i expected
great job on my shop Floor thanks again Brad
Floors came out great and the countertops too!
Monroe Basement Inquiries
Basement floors come up often for us in a well and septic town, and these details help us quote yours.
Well or town water
Tell us which. A well system sitting on your floor changes how we lay out the prep and the edges of the coating.
Rough square footage
A measurement or a rough size puts you in a rate band before we arrive. Bigger floors cost less per square foot.
Any sign of dampness
A musty smell, white powder on your concrete or a sump that runs often. Mention it, and we'll plan the moisture test around it.
Towns Near Monroe We Also Cover
If you're in one of these towns, you share a border or a short drive with Monroe, and we'll quote you the same way.
The nearest larger town
Bridgeport is the closest of our ten largest towns to you, and its page covers the towns around it: Bridgeport.
Choose your space
Pick the floor you're thinking about and see how we coat it.
Garage
- Slip-resistant.
- Shrugs off oil and road salt.
- Hot tires don't lift it.
Basement
- Waterproof.
- Moisture tested first.
- No more concrete dust.
Commercial and kitchens
- USDA approved for commercial kitchens.
- Takes a mop and a spill.
- Phased around your hours.
Industrial
- Forklift traffic.
- Chemical resistant.
- Anti-slip where specified.
Pool and patio
- Grippy when wet.
- UV-stable top coat.
- Keeps its color.
Countertops
- Seamless.
- Wipes clean.
- Metallic or solid color.
How your epoxy floor gets done, from first call to parking on it
Three steps, and Brad does every one of them himself. Most residential floors are finished in a day.
- 1
You call, text or send the form
Tell us the room and roughly how big it is. We'll talk you through the range and book a time to come and look, often the same day. Weekends count, and there's nothing to sign.
- 2
Brad reads your slab and you pick your finish
He checks for cracks, old coating and moisture, then measures up. You choose your flake blend or metallic against your own floor, not a brochure. Your written quote comes back the same day.
- 3
We grind it back and build your floor up
Your slab goes back to bare concrete under a diamond grinder with dust extraction. Then the primer, the body coat with your flake or metallic, and the top coat. You get your walk-on and park-on times with the quote.
Epoxy floors in Monroe
About 11.5 miles from the workshop in Milford, which is a same-day visit. Off the shoreline, so the preparation is more often about the age and condition of the concrete than about water. About 5,343 detached owner households sit here, which is the housing that has a garage to coat.
Get my free quoteOur service area on the map
Every town within 30 miles of our base at 9 Wood Avenue in Milford, on Connecticut land.
Questions people ask
Can you coat a Monroe basement that has a well tank on the floor?
Yes. We coat around your tank's base, or under it if it's been raised, and Brad explains at the quote visit which approach fits and how it affects your price. We test moisture first either way.
Do you do commercial floors in Monroe?
Yes. We coat shop, warehouse, office and retail floors, and if your business is along Routes 25, 34 or 111 or in the Pepper Street industrial area, you're inside our service range.
Is a 1970s or 1980s Monroe garage floor too old to coat?
Rarely. We can usually coat a slab from those decades after diamond grinding and crack repair. Brad reads and tests your slab first, and you'll have the quote back the same day.
How far is Monroe from you?
You're about 11 and a half miles from our workshop in Milford, well within the hour's drive Brad covers, so getting out to you for a quote visit is easy to arrange.
Do you charge extra to come to Monroe?
No. Your estimate is free and Monroe is inside our regular working area.
What does it cost?
It is decided by the size of the floor, the system you pick and the state of the slab. The estimate is free and comes back the same day you ask.
Ready to stop looking at that floor?
Tell us roughly what you have and we'll come and look at it. The quote is free, there's nothing to sign, and you'll know what your floor costs before you commit to anything.
Get Your Free Quote Call or Text (203) 496-6386