Epoxy floor coating in North Haven, CT.
Atlas Epoxy Floors coats garages, basements, patios and commercial floors in North Haven, Connecticut, about 15.2 miles from our workshop in Milford. Your town has around 7,303 owner-occupied detached houses and sits inland and back from the shoreline water table, so your slab runs drier than the coastal towns on average. Your estimate is free, and Brad reads your slab before we quote it.
Free, no obligation, and nothing to sign. We answer the same day, weekends included.
Epoxy and Resin Flooring in North Haven, Connecticut
The Quinnipiac River is tidal all the way through North Haven, according to the town's plan, and FEMA's revised maps added 158 acres to the town's 100-year floodplain. That makes the river corridor the first thing Brad thinks about when you call us about a basement here. Away from the river, your house is likely mid-century, with a median build year of 1964 in Census figures and about four in five houses detached.
The housing here
US Census ACS 2024 five-year estimates put North Haven at about 9,586 occupied households, of which roughly 7,796 own rather than rent, and about 7,303 of those are detached houses. Detached is the number that matters to us, because that is where your garage is. Half the houses around you were built before 1964, about two in five before 1960 and about one in ten since 2000, and the age of your house is the best single guide we have to what your slab needs.
Does your North Haven home near the Quinnipiac need a moisture test before coating?
Yes. If your North Haven home is near the tidal Quinnipiac, the lower Muddy River or Pine Brook, you're closest to mapped flood zones, so we test your slab before Brad quotes.
Where the town maps flood risk
The plan names the Quinnipiac corridor as the highest flooding potential in town, with smaller areas along the lower reach of the Muddy River near Sheffield Road, Pine Brook near Todd Drive South, and a few properties along Waterman Brook. If you're on one of these, tell us.
Tidal water and marsh
Near a tidal river and its marshes, groundwater can sit high and rise with storms. Your basement slab can look dry in August and sweat in March, which is why our plastic-sheet test counts for more than a quick look.
Choosing a system for your damp slab
If the test shows vapor coming through, we put a moisture-tolerant primer under your coating. If water's actually pooling, you'd start with drainage, and Brad will say that plainly before we quote anything for the floor itself.
Every floor on this page is one we poured
North Haven Mid-Century Homes and Their Slabs
North Haven's own plan describes a housing stock heavily weighted toward mid-20th-century homes, and yours may be one of the many now due for renovation.
If your home is from the 1950s or 1960s
A little over four in ten North Haven homes were built before 1960, in Census figures, with many more following in the 1960s. Your slab from that period was often poured without a vapor barrier underneath, so we test for moisture first.
If you've just bought or are selling
The plan notes a growing share of homeowners over 65 and expects many houses to turn over in the coming years. Your garage or basement floor is one of the simpler updates we can do when a house sells or you move in.
Single-family zoning
The plan says single-family zones dominate the east and northwest sides of town, and the Census counts about four in five homes as detached. Most garage jobs we do here are one household's floor, and we measure and quote yours on its own.
Where Atlas Works in North Haven
North Haven's plan, its schools and its fire stations point to a few sections of town you probably orient by, and we use them too.
Montowese
Montowese Avenue meets both Route 5 and Quinnipiac Avenue, and the Montowese fire station sits on Quinnipiac Avenue. If your home is on the lower ground toward the river, it's one we're most careful to test.
Clintonville
Clintonville Road and the elementary school that shares its name anchor this section. The plan suggests the Clintonville Road corridor for age-restricted housing, and if you're in a townhome there, your garage is a different job for us from an older detached house.
Ridge Road and the west side
Ridge Road School and the West Ridge fire station mark the western side of town, where the plan maps mostly single-family zones. Outer Ridge Road is one of the roads the plan lists for its character.
North Haven Industrial Floors Along I-91
If you run an industrial or commercial building in North Haven, it's most likely along I-91, from Universal Drive and Sackett Point Road to State Street, per the town's plan.
Universal Drive and Sackett Point Road
The plan lists both as development areas and notes that river-facing parcels there sit beside tidal marsh. If your large industrial floor is in this stretch, we may need a moisture check alongside the usual diamond grinding.
Washington Avenue, Route 5
The plan wants the commercial area along Route 5 between the I-91 exits improved. If your retail, auto or service building is on it, your floors could range from a customer-facing showroom to working bays that need anti-slip texture.
Reused industrial sites
The plan highlights the Northeast Gateway Industrial Park, the Wharton Brook Industrial Park and the former Pratt and Whitney and Upjohn sites. Your old industrial slab usually carries decades of oil and coatings, and we take those off before anything new goes down.
What customers wrote
4.7 from 15 Google reviews. We publish every one of them on the reviews page, including the one star and what came of it.
excellent job on my Garage thanks again
best in the area when it comes to epoxy thanks gain Brad
Great experience thanks again Brad
North Haven Basement Inquiries
If your North Haven basement is near the river or a brook, these details help us quote.
Distance to water
Roughly how close you are to the Quinnipiac, the Muddy River or Pine Brook. It tells Brad how hard to look.
Seasonal dampness
Does your floor feel damp in spring or after storms? Mention it to us even if it dries out later.
Your sump pump
If you've got a sump, tell us how often it runs. That's useful evidence about groundwater under your slab.
Towns Near North Haven We Also Cover
If you're in one of these towns, you share a border or a short drive with North Haven, and we'll quote you the same way.
The nearest larger town
Hamden is the closest of our ten largest towns to you, and its page covers the towns around it: Hamden.
Next door
Your neighbors in North Haven: North Branford, Wallingford, New Haven, East Haven, Bethany. You'll find every town we cover on our service area page.
Choose your space
Pick the floor you're thinking about and see how we coat it.
Garage
- Slip-resistant.
- Shrugs off oil and road salt.
- Hot tires don't lift it.
Basement
- Waterproof.
- Moisture tested first.
- No more concrete dust.
Commercial and kitchens
- USDA approved for commercial kitchens.
- Takes a mop and a spill.
- Phased around your hours.
Industrial
- Forklift traffic.
- Chemical resistant.
- Anti-slip where specified.
Pool and patio
- Grippy when wet.
- UV-stable top coat.
- Keeps its color.
Countertops
- Seamless.
- Wipes clean.
- Metallic or solid color.
How your epoxy floor gets done, from first call to parking on it
Three steps, and Brad does every one of them himself. Most residential floors are finished in a day.
- 1
You call, text or send the form
Tell us the room and roughly how big it is. We'll talk you through the range and book a time to come and look, often the same day. Weekends count, and there's nothing to sign.
- 2
Brad reads your slab and you pick your finish
He checks for cracks, old coating and moisture, then measures up. You choose your flake blend or metallic against your own floor, not a brochure. Your written quote comes back the same day.
- 3
We grind it back and build your floor up
Your slab goes back to bare concrete under a diamond grinder with dust extraction. Then the primer, the body coat with your flake or metallic, and the top coat. You get your walk-on and park-on times with the quote.
Epoxy floors in North Haven
About 15.2 miles from the workshop in Milford, which is a same-day visit. Off the shoreline, so the preparation is more often about the age and condition of the concrete than about water. About 7,303 detached owner households sit here, which is the housing that has a garage to coat.
Get my free quoteOur service area on the map
Every town within 30 miles of our base at 9 Wood Avenue in Milford, on Connecticut land.
Questions people ask
Is my North Haven basement too close to the Quinnipiac for an epoxy floor?
Usually not. Brad tests your slab with a plastic sheet and checks for active water. If it's damp, we put a moisture-tolerant primer under the coating, while a basement that actually floods needs drainage work first.
Do you coat garage floors in North Haven's older homes?
Yes. Many North Haven homes date from the 1950s and 1960s, and your garage slab usually needs diamond grinding to remove old paint and stains. We test your slab and Brad quotes the same day.
Can you coat an industrial floor near I-91 in North Haven?
Yes. Industrial and warehouse floors along I-91, including Universal Drive and Sackett Point Road, are in our area. If your floor is larger, it lands in a lower per-square-foot rate band.
How far is North Haven from you?
You're about 15 miles from our workshop in Milford, a short drive for Brad to come and look at your slab.
Do you charge extra to come to North Haven?
No. Your estimate is free and North Haven is inside our regular working area.
What does it cost?
It is decided by the size of the floor, the system you pick and the state of the slab. The estimate is free and comes back the same day you ask.
Ready to stop looking at that floor?
Tell us roughly what you have and we'll come and look at it. The quote is free, there's nothing to sign, and you'll know what your floor costs before you commit to anything.
Get Your Free Quote Call or Text (203) 496-6386