
Around the airport and the river
Light industrial, hangars, storage and service units. Larger square footage than a garage, which lands in a lower rate band, and traffic that usually points at quartz or a heavier build rather than flake.
Atlas Epoxy Floors coats garages, basements, patios and commercial floors in Stratford, Connecticut, about 3.7 miles from our workshop in Milford. Your town has around 13,635 owner-occupied detached houses and sits on Long Island Sound, so a shoreline water table is why we test your basement slab before we coat it. Your estimate is free, and Brad reads your slab before we quote it.
Free, no obligation, and nothing to sign. We answer the same day, weekends included.
Stratford sits four miles down the shoreline from us and its housing is close to Milford's, which means the same mid-century garages with slabs patched more than once.
US Census ACS 2024 five-year estimates put Stratford at about 20,613 occupied households, of which roughly 16,817 own rather than rent, and about 13,635 of those are detached houses. Detached is the number that matters to us, because that is where your garage is. Half the houses around you were built before 1958, about half before 1960 and hardly any since 2000, and the age of your house is the best single guide we have to what your slab needs.

A lot of the housing here went up between the 1940s and the 1960s, so your slab has had eighty years to acquire history.
Older garage slabs carry several generations of repair, in different materials, at different levels. Our grinding is what makes yours one surface again, and it takes longer than a newer slab.
Decades of cars leave contamination we have to take out before anything bonds. That is a preparation question rather than a cleaning one.
Plenty of Stratford garages are separate from the house and unheated, which changes cure times in winter. Talk to us about scheduling.
Every floor on this page is one we poured
A large part of Stratford went up between the 1940s and the 1960s, and that single fact predicts most of what Brad finds under the dust.

Post-war housing was built quickly. Garage slabs from that era are often thinner and less well finished than modern ones, which shows up as surface pitting rather than as a structural problem.
Two or three generations of patching in different materials at different levels. Grinding is what makes that one surface again and it takes longer than a new slab.
Common here, and it changes the calendar. An unheated detached garage in November is a polyaspartic conversation rather than an epoxy one.
Split fairly evenly between houses near the shore and the commercial strip.
Low-lying, close to the water. Basement slabs here get tested as a matter of course rather than as an upsell.
Newer subdivisions, attached garages, drier and flatter concrete.
Service units, small workshops and storage along the main routes. Larger floors, lower rate band.

The town is not only mid-century housing. There is a real working side to it and those floors ask different questions.

Light industrial, hangars, storage and service units. Larger square footage than a garage, which lands in a lower rate band, and traffic that usually points at quartz or a heavier build rather than flake.

Concrete that has been worked on for decades, often coated more than once, sometimes oil-soaked deep into the surface. Preparation on these is the job, and it is where an honest quote and an optimistic one separate.

Workshops, tire bays and small manufacturing along the main routes. Chemical exposure and dropped tools decide the specification.

Most of these floors can be done in sections so the business keeps trading. It costs more in mobilisation and it is usually cheaper than the lost days.
4.7 from 15 Google reviews. We publish every one of them on the reviews page, including the one star and what came of it.
Great experince did the shop floors and came out great!
excellent job on my Garage thanks again
best in the area when it comes to epoxy thanks gain Brad
The most common call from this town and what helps on it.
It changes cure times in cold weather and can decide the system.
Old paint or a failed kit is the biggest single variable in the quote.
Single, double, or measured. It puts you in a rate band before he arrives.
If you're in one of these towns, you share a border or a short drive with Stratford, and we'll quote you the same way.
Bridgeport is the closest of our ten largest towns to you, and its page covers the towns around it: Bridgeport.

Pick the floor you're thinking about and see how we coat it.
Garage
Basement
Commercial and kitchens
Industrial
Pool and patio
Countertops
Three steps, and Brad does every one of them himself. Most residential floors are finished in a day.
Tell us the room and roughly how big it is. We'll talk you through the range and book a time to come and look, often the same day. Weekends count, and there's nothing to sign.
He checks for cracks, old coating and moisture, then measures up. You choose your flake blend or metallic against your own floor, not a brochure. Your written quote comes back the same day.
Your slab goes back to bare concrete under a diamond grinder with dust extraction. Then the primer, the body coat with your flake or metallic, and the top coat. You get your walk-on and park-on times with the quote.
About 3.7 miles from the workshop in Milford, which is a same-day visit. On the shoreline, so a slab here is asked to deal with damp before it is asked to deal with anything else, and the moisture test comes first. About 13,635 detached owner households sit here, which is the housing that has a garage to coat.
Get my free quoteEvery town within 30 miles of our base at 9 Wood Avenue in Milford, on Connecticut land.
It is normal on Stratford housing of that age. Our grinding makes your floor one surface again, it just takes longer than a newer slab.
No. Your estimate is free and Stratford is inside our regular working area.
It is decided by the size of the floor, the system you pick and the state of the slab. The estimate is free and comes back the same day you ask.
Yes, and it is one of the most common jobs here. Stratford housing of the 1940s to 1960s tends to have slabs with a lot of history in them.
It changes cure times in cold weather and it is worth raising at the quote, because it can decide the system.
Under four miles from the workshop in Milford.
Yes. Those are the low-lying parts of the town, so the moisture test is worth running before you take quotes.
Tell us roughly what you have and we'll come and look at it. The quote is free, there's nothing to sign, and you'll know what your floor costs before you commit to anything.
Get Your Free Quote Call or Text (203) 496-6386