Epoxy floor coating in Ridgefield, CT.
Atlas Epoxy Floors coats garages, basements, patios and commercial floors in Ridgefield, Connecticut, about 23.7 miles from our workshop in Milford. Your town has around 6,824 owner-occupied detached houses and sits inland and back from the shoreline water table, so your slab runs drier than the coastal towns on average. Your estimate is free, and Brad reads your slab before we quote it.
Free, no obligation, and nothing to sign. We answer the same day, weekends included.
Epoxy and Resin Flooring in Ridgefield, Connecticut
Ridgefield's population roughly quadrupled between 1950 and 1970, its plan says, and for a stretch of the 1960s the town was adding a school a year. That boom built a large share of the houses standing today, and if you live in one, your garage is now 55 to 75 years old. Add the resort-era estates and five historic districts, and you've got a town where we expect an older slab with some history as the normal starting point.
The housing here
US Census ACS 2024 five-year estimates put Ridgefield at about 9,194 occupied households, of which roughly 7,681 own rather than rent, and about 6,824 of those are detached houses. Detached is the number that matters to us, because that is where your garage is. Half the houses around you were built before 1972, about a quarter before 1960 and about one in ten since 2000, and the age of your house is the best single guide we have to what your slab needs.
How should you prep your 1960s Ridgefield garage for coating?
Your Ridgefield garage from the 1960s boom usually needs grinding and crack repair before coating, plus a moisture check, and we price the prep before you agree to anything.
Grinding off decades of finish
Your sixty-year-old garage floor has usually been painted or sealed at least once. We diamond-grind it back to clean concrete so your new coating bonds properly. Skipping that step is how coatings peel in their first winter.
Cracks and settled sections
A slab that age has moved. We fill the cracks, and where a section has settled, Brad will tell you whether the coating can carry it or the concrete needs work first, so you'll know before install day.
Cold garages and the calendar
If your older garage runs cold in winter, that limits which systems will cure. We'd use polyaspartic in cold months because it cures at lower temperatures and you're back in the garage the same day.
Every floor on this page is one we poured
Ridgefield Housing From Estates to Postwar Subdivisions
Census figures put Ridgefield's median home at 1972, with nearly a quarter built before 1960 and about one in seven since 2000, so we see your slab's age range often.
Estates from the resort era
After the branch rail line arrived in 1870, the plan says, Ridgefield became a summer resort and dozens of large estates went up. If you own a building from that era, it was poured long before modern standards, so our prep usually runs longer.
The 1960s building wave
Housing growth averaged about 235 units a year in the 1960s, per the plan, and slowed to about 55 a year or less after 2000. There's a good chance your Ridgefield garage dates from that first stretch.
Mostly detached houses
The plan puts single-family detached homes at about four in five housing units, and Census figures show about three in four. Either way, most of our jobs here are your private garages and basements.
Where We Work in Ridgefield
Ridgefield's plan names its historic districts and business areas, and together they make a good working map for us and for you.
Ridgefield Center and Main Street
The plan treats the Center as the town's business, civic and cultural core, and the Ridgefield Center Historic District covers part of it. If your shop, office or garage is behind Main Street, you've likely got an older slab.
Branchville
In the southeast corner at Routes 7 and 102, Branchville has a train station and the Norwalk River, and the town wants it redeveloped as a transit-oriented village. If you're building or renovating there, you'll need a commercial floor, and we coat those.
Ridgebury and Titicus Hill
Both are historic districts on the town's list. If your home is one of the older ones in them, we check your slab carefully, since concrete that age has usually been repaired or painted before, sometimes more than once.
Copps Hill, Route 7 and Ridgefield Business Floors
Beyond the Center and Branchville, Ridgefield's plan points business to Copps Hill, the Routes 7 and 35 intersection, the rest of Route 7 and office parks, and we work in all of them.
Copps Hill
The plan describes the Copps Hill area on Route 35 as a place where residents get everyday goods and services. If your store or service floor there sees steady foot traffic and wet boots in winter, we'd suggest a quartz or anti-slip finish.
Routes 7 and 35
The plan says this area has moved from a manufacturing focus, the former Benrus plant, to mixed use, and that topography limits it. If you're in converted plant space, we'll often need to grind off old industrial coatings before new ones go down.
Office and research parks
The plan names large office and research parks as business locations, and Boehringer Ingelheim in the far north of town ties straight into Danbury's sewer system. For your lab, corridor or mechanical room floors, we'd use chemical-resistant systems.
What customers wrote
4.7 from 15 Google reviews. We publish every one of them on the reviews page, including the one star and what came of it.
great job on my Epoxy floors and countertops
amazing job on my basement thanks again Brad the epoxy flooring was better then even i expected
great job on my shop Floor thanks again Brad
Ridgefield Older Home Inquiries
If your house predates 1980, these details help us quote your floor.
Year built and any additions
Your 1960s house with a later garage addition can have two slabs of different ages. We'd like to know before Brad looks.
Garage heated or cold
If your garage is cold, a winter job leans toward polyaspartic. If it's heated, every system stays on the table.
Photos of your slab
A few phone photos of cracks and stains let us rough out the prep before the visit.
Towns Near Ridgefield We Also Cover
If you're in one of these towns, you share a border or a short drive with Ridgefield, and we'll quote you the same way.
The nearest larger town
Danbury is the closest of our ten largest towns to you, and its page covers the towns around it: Danbury.
Next door
Your neighbors in Ridgefield: Redding, Bethel, Wilton, Weston, New Canaan. You'll find every town we cover on our service area page.
Choose your space
Pick the floor you're thinking about and see how we coat it.
Garage
- Slip-resistant.
- Shrugs off oil and road salt.
- Hot tires don't lift it.
Basement
- Waterproof.
- Moisture tested first.
- No more concrete dust.
Commercial and kitchens
- USDA approved for commercial kitchens.
- Takes a mop and a spill.
- Phased around your hours.
Industrial
- Forklift traffic.
- Chemical resistant.
- Anti-slip where specified.
Pool and patio
- Grippy when wet.
- UV-stable top coat.
- Keeps its color.
Countertops
- Seamless.
- Wipes clean.
- Metallic or solid color.
How your epoxy floor gets done, from first call to parking on it
Three steps, and Brad does every one of them himself. Most residential floors are finished in a day.
- 1
You call, text or send the form
Tell us the room and roughly how big it is. We'll talk you through the range and book a time to come and look, often the same day. Weekends count, and there's nothing to sign.
- 2
Brad reads your slab and you pick your finish
He checks for cracks, old coating and moisture, then measures up. You choose your flake blend or metallic against your own floor, not a brochure. Your written quote comes back the same day.
- 3
We grind it back and build your floor up
Your slab goes back to bare concrete under a diamond grinder with dust extraction. Then the primer, the body coat with your flake or metallic, and the top coat. You get your walk-on and park-on times with the quote.
Epoxy floors in Ridgefield
About 23.7 miles from the workshop in Milford. Off the shoreline, so the preparation is more often about the age and condition of the concrete than about water. About 6,824 detached owner households sit here, which is the housing that has a garage to coat.
Get my free quoteOur service area on the map
Every town within 30 miles of our base at 9 Wood Avenue in Milford, on Connecticut land.
Questions people ask
Why does my Ridgefield garage floor need extra prep?
Ridgefield grew fastest from 1950 to 1970, per its plan, with housing growth averaging about 235 units a year in the 1960s. If your garage is from that era, it's now 55 years or older and usually needs our grinding and crack repair first.
Do you coat floors in Branchville or on Route 7?
Yes. The town is pushing redevelopment in Branchville and names Route 7 as a business corridor. We coat your shop, office or showroom floor there, and you'll usually have our quote the same day.
Can you coat my garage floor during a Ridgefield winter?
Yes, with the right system. Polyaspartic cures at lower temperatures than standard epoxy and you can use it the same day, so we can still do your unheated garage in cold months.
How far is Ridgefield from you?
Ridgefield is about 24 miles from our workshop in Milford. You're well within the area we cover, which runs out to about an hour from our shop.
Do you charge extra to come to Ridgefield?
No. Your estimate is free and Ridgefield is inside our regular working area.
What does it cost?
It is decided by the size of the floor, the system you pick and the state of the slab. The estimate is free and comes back the same day you ask.
Ready to stop looking at that floor?
Tell us roughly what you have and we'll come and look at it. The quote is free, there's nothing to sign, and you'll know what your floor costs before you commit to anything.
Get Your Free Quote Call or Text (203) 496-6386